Hapter, Nstallation, 1 screw holes – NEXCOM NEX 883 User Manual
Page 17: 2 pre-installation precautions

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
6
Chapter 2: Installation
NEX 883 User Manual
This is a Micro ATX form factor (9.6” x 9.6”, 24.4 x 24.4 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis
to ensure that the motherboard fits into it.
2.1 Screw Holes
Place screws into the holes to secure the motherboard to the chassis.
C
haPter
2: I
nstallatIon
Make sure to unplug the power cord before installing or remov-
ing the motherboard. Failure to do so may cause physical injuries
to you and damages to motherboard components.
Do not over-tighten the screws! Doing so may damage the
motherboard.
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
1.
Unplug the power cord from the wall socket before touching any com-
ponent.
2.
To avoid damaging the motherboard components due to static electrici-
ty, NEVER place your motherboard directly on the carpet or the like. Also
remember to use a grounded wrist strap or touch a safety grounded
object before you handle components.
3.
Hold components by the edges and do not touch the ICs.
4.
Whenever you uninstall any component, place it on a grounded anti-
static pad or in the bag that comes with the component.