NEXCOM NEX 883 - Manual (Page 23)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 12
Chapter 2: Installation
NEX 883 User Manual
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT
place jumper caps over these headers and connectors. Placing
jumper caps over the headers and connectors will cause perma-
nent damage of the motherboard!
LVDS Panel Connector
(40-pin LVDS1)
(see p.8, No.1)
1 39
40 2
Pin Definition Pin Definition Pin Definition
1 R_LVDD 2 R_LVDD 3 +3V
4 LDDC_CLK 5 LDDC_DATA 6 LVDS_A_DATA0#
7 LVDS_A_DATA0 8 GND 9 LVDS_A_DATA1#
10 LVDS_A_DATA1 11 GND 12 LVDS_A_DATA2#
13 LVDS_A_DATA2 14 GND 15 LVDS_A_DATA3#
16 LVDS_A_DATA3 17 GND 18 LVDS_A_CLK#
19 LVDS_A_CLK 20 GND 21 LVDS_B_DATA0#
22 LVDS_B_DATA0 23 GND 24 LVDS_B_DATA1#
25 LVDS_B_DATA1 26 GND 27 LVDS_B_DATA2#
28 LVDS_B_DATA2 29 DPLVDD_EN 30 LVDS_B_DATA3#
31 LVDS_B_DATA3 32 GND 33 LVDS_B_CLK#
34 LVDS_B_CLK 35 GND 36 CON_LBKLT_EN_R
37 CON_LBKLT_CTL_R 38 LCD_BLT_VCC 39 LCD_BLT_VCC
40 LCD_BLT_VCC
Inverter Power Control Wafer
(6-pin BLT_PWR2)
(see p.8, No.4)
1
Pin Signal Name Pin Signal Name
1 GND 2 GND
3 CON_LBKLT_CTL 4 CON_LBKLT_EN
5 LCD_BLT_VCC 6 LCD_BLT_VCC