NEXCOM NISE 3520 - Manual (Page 62)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 49
Chapter 3: System Setup
NISE 3520 Series User Manual
4. Place the SATA hard drive on the drive bay. Make sure the connector
side of the SATA drive is facing the opening of the drive bay.
5. Align the mounting holes that are on the sides of the SATA drive with
the mounting holes on the drive bay then use the provided mounting
screws to secure the drive in place.
Connector side of
the SATA drive
6. Connect the SATA data cable and SATA power cable to the connectors
on the SATA drive.
SATA power
cable
SATA data
cable