NEXCOM NISE 3520 - Manual (Page 55)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 42
Chapter 3: System Setup
NISE 3520 Series User Manual
Chapter 3: System Setup
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
1. The screws on the cover are used to secure the cover to the chassis.
2. Remove these screws and then put them in a safe place for later use.
3. Lift up the cover and then remove it from the chassis.
The dots denote the locations of the screws.