Appendix c: led programming guide, C: l, Ppendix – NEXCOM NISE 2400 User Manual
Page 83: Rogramming, Uide
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
69
NISE 2400 Series User Manual
Appendix C: LED Programming Guide
a
PPendIx
C: L
ed
P
roGrammInG
G
uIde
LEDs are provided for custom system design. This appendix provides
definitions and its default setting for the LEDs in the NISE 2400 series.
The LED definition is shown in the following table:
Pin
PowerOn
default
Address
LED2D-PR0
High
A07h (Bit5)
LED2D-PR1
High
A07h (Bit4)
LED2D-PR2
High
A07h (Bit3)
LED2D-PR3
High
A07h (Bit2)
Control the LED2D (PR0/ PR1/ PR2/ PR3) level from I/O port A07h bit (2/3/4/5).
The bit is Set/Clear indicated output High/Low
This manual is related to the following products: