beautypg.com

Serial port 3 configuration, Serial port 4 configuration – NEXCOM NISE 2400 User Manual

Page 69

background image

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.

55

NISE 2400 Series User Manual

Chapter 4: BIOS Setup

Serial Port 3 Configuration

This section is used to configure serial port 3.

Serial Port

Enables or disables the serial port.

Onboard Serial Port Mode

Select this to change the serial port mode to RS232 or GPS.

Advanced

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable or Disable Serial Port
(COM)

Serial Port 3 Configuration

Serial Port

Device Settings

Onboard Serial Port Mode

[Enabled]

IO=3E8h; IRQ=11;

[RS232]

Serial Port 4 Configuration

This section is used to configure serial port 4.

Serial Port

Enables or disables the serial port.

Advanced

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable or Disable Serial Port
(COM)

Serial Port 4 Configuration

Serial Port

Device Settings

[Enabled]

IO=2E8h; IRQ=10;

This manual is related to the following products: