Installing a mini-pcie module (full-size) – NEXCOM NISE 2400 User Manual
Page 53
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
39
NISE 2400 Series User Manual
Chapter 3: System Setup
1. Locate the mini-PCI Express slot on the board. Remove the LAN module
bracket and put it in a safe place.
2. Insert the wireless LAN module into the mini-PCI Express slot at a 45
degree angle until the gold-plated connector on the edge of the module
completely disappears inside the slot.
Installing a Mini-PCIe Module (Full-size)
LAN module
bracket
3. Push the module down and then secure it with mounting screws.
Mounting
screw
This manual is related to the following products: