NEXCOM NEX 608 - Manual (Page 64)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 51
Chapter 3: BIOS Setup
NEX 608 User Manual
Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
. A dialog box will appear. Confirm by selecting Yes. You can also
press to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press . You may be prompted to confirm again before exiting. You
can also press to exit without saving the changes.
Discard Changes
To discard the changes, select this field then press . A dialog box
will appear. Confirm by selecting Yes to discard all changes made and
restore the previously saved settings.
Load Optimal Defaults
Loads the optimal default values from the BIOS ROM.
Load Failsafe Defaults
Loads the fail-safe default values from the BIOS ROM.
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit Security Advanced Boot Chipset PCIPnP Main