Advanced – NEXCOM NEX 608 User Manual

Page 48

Chapter 3: BIOS Setup

NEX 608 User Manual

Advanced

The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.

Setting incorrect field values may cause the system to malfunc-
tion.

IDE Configuration

This section is used to configure the IDE drives.

USB Configuration

This section is used to configure USB devices.

ACPI Configuration

This section is used to configure the Advanced ACPI configuration.

Super IO Configuration

This section is used to configure the I/O functions supported by the on-
board Super I/O chip.

Hardware Health Configuration

This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.

Onboard LAN Boot ROM

Enable this field if you wish to use the boot ROM (instead of a disk drive)
to boot-up the system and access the local area network directly. If you
wish to change the boot ROM’s settings, type the and
keys simultaneously when prompted during boot-up. Take note: you will
be able to access the boot ROM’s program (by typing + )
only when this field is enabled.

HyperThreading Technology

Enable this field for Windows XP and Linux which are optimized for
Hyper-Threading technology. Select disabled for other OSes not optimized
for Hyper-Threading technology.

Configure the IDE

devices(s).

BIOS SETUP UTILITY

← →

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

General Help

F10 Save and Exit

ESC Exit

Advanced Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

IDE Configuration

USB Configuration

ACPI Configuration

SuperIO Configuration

Hardware Health Configuration

Onboard LAN Boot ROM

HyperThreading Technology

Exit

Security

Advanced

Boot

Chipset

PCIPnP

Main

[Disabled]