NEXCOM NEX 608 - Manual (Page 53)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 40
Chapter 3: BIOS Setup
NEX 608 User Manual
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Allows BIOS to select
Parallel Port Base
Address.
BIOS SETUP UTILITY
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Ite8783 Super IO Chipset
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Serial Port1 Address [3F8]
Serial Port1 IRQ [3]
Serial Port2 Address [2F8]
Serial Port2 IRQ [4]
Serial Port3 Address [3E8]
Serial Port3 IRQ [10]
Serial Port3 Frequency Mode [RS232]
Serial Port4 Address [2E8]
Serial Port4 IRQ [11]
Serial Port4 Mode [Normal]
Advanced
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Parallel Port Address
Selects the parallel port base address. The options are Disabled, 378, 278
and 3BC.
Parallel Port Mode
Selects the parallel port mode. The options are Normal, EPP, ECP and
EPP+ECP.
Parallel Port IRQ
Selects an IRQ for the parallel port. The options are IRQ5 and IRQ7.
Serial Port1 Address to Serial Port4 Address
Selects the serial port base address. The options are Disabled, 3F8, 3E8
and 2E8.
Serial Port1 IRQ to Serial Port4 IRQ
Selects an IRQ for the onboard serial port. The options are 3, 4, 10 and
11.