Hardware specifications – NEXCOM NEX 608 User Manual

Page 15

NEX 608 User Manual

Chapter 1: Product Introduction

Hardware Specifications

Edge I/O
• 1x PS/2 mouse port
• 1x PS/2 keyboard port
• 3x DB9 RS232 COM ports (COM1/2/4)
• 1x DB15 VGA port
• 3x LAN ports
• 2x USB 2.0 ports
• 1x Line-out jack
• 1x Mic-in jack

Internal I/O
• 1x RS232/422/485 COM connector (COM3)
• 3x 10-pin USB connectors (1 port supports USB DOM)
• 8x GPIO 10-pin connector, GPI 0~3 and GPO 0~3, with TTL Level (0/5 V)
• 1x connector for power LED and HDD active LED
• 1x 26-pin parallel connector
• 1x 3-pin fan connector for CPU
• 1x mini-din connector for PS2 keyboard and mouse
• Onboard buzzer / SMBus 2.0 / reset

Watchdog Timer
• Watchdog timeout is programmable by software from 1 sec to 255

sec and from 1 min to 255 minutes (Tolerance 15% under 25°C room
temperature)

CPU
• Onboard Intel

Atom™ Dual Core D525 (1.8GHz, 1M Cache) processor

Platform Control Hub
• Intel

NH82801HBM (ICH8M)

Main Memory
• 1x 204-pin DDR3 SODIMM socket
• Supports up to 2GB DDR3 800MHz memory; non-ECC and unbuffered

Onboard LAN
• 3x Realtek RTL8111L Gigabit Ethernet LAN controllers
• Supports boot from LAN and Wake on LAN
• 3x RJ45 ports with LED

Onboard Audio
• Realtek ALC888 High Definition CODEC
• 1x Line-out phone jack
• 1x Mic-in phone jack

Display
• Intel

D525 integrated graphic engine

- Supports DirectX 9, with Intel Clear Video Technology on MPEG2

hardware acceleration

• Analog VGA interface
- 1x DB15 VGA port
- Supports up to 2048x1563 @ 60Hz resolution
• LVDS interface
- Supports single 18/24-bit LVDS channel