NEXCOM NEX 608 - Manual (Page 61)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 48
Chapter 3: BIOS Setup
NEX 608 User Manual
SMBUS Controller
Enables or disables the SMBUS.
Restore On AC Power Loss
Power Off When power returns after an AC power failure, the system’s
power is off. You must press the Power button to power-on
the system.
Power On When power returns after an AC power failure, the system
will automatically power-on.
Last State When power returns after an AC power failure, the system
will return to the state where you left off before power
failure occurs. If the system’s power is off when AC power
failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the
system will power-on when power returns.
Power Type
Selects the type of power used.
PCIE Port 0 to PCIE Port 4
Enables or disables the PCIE port.