NEXCOM NEX 608 - Manual (Page 59)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 46
Chapter 3: BIOS Setup
NEX 608 User Manual
Chipset
This section is used to configure the system based on the specific features
of the chipset.
Setting incorrect field values may cause the system to malfunc-
tion.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Configure North Bridge
features.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
u North Bridge Configuration
u South Bridge Configuration
North Bridge Configuration
This section is used to configure the north bridge features.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
North Bridge Chipset Configuration
PCI MMIO Allocation: 4GB to 3072MB
Initiate Graphic Adapter [IGD]
Internal Graphics Mode Select [Enabled, 8MB]
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [256MB]
Boot Display Device [CRT + LVDS]
Flat Panel Type [1024x768 18bit]
Flat Panel Control [100%]
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
Internal Graphics Mode Select
Selects the amount of system memory used by the internal graphics de-
vice.
Select the amount of
system memory used
by the internal graphics
device.
Chipset
Exit Security Advanced Boot Chipset PCIPnP Main