12 mounting instructions for loudspeakers, Mounting instructions for loudspeakers, Mounting instructions for loudspeakers) – KLING & FREITAG K&F ACCESS T9 User Manual
Page 40

User’s Manual
ACCESS SYSTEM
KLING & FREITAG GMBH ©1995-2009
Version 6.0, 17.03.2009
Page 40 of 60
12.
Mounting Instructions for Loudspeakers
Mount the speakers securely. To avoid injury or damage, always be sure to mount the
speakers securely so that they do not fall. Speakers, which are stacked, must be se-
cured with securing straps. When laying the connecting cables, make sure that no-body
can trip.
The stability of stacked systems (also valid for the use of stands and distance rods!) is
contingent upon the following stability requirement. These conditions must, therefore,
be guaranteed by the user:
Stacked systems may not fall over even if they are incline
Stacked systems may not fall over even if they are incline
Stacked systems may not fall over even if they are incline
Stacked systems may not fall over even if they are inclined by 10° in each dire
d by 10° in each dire
d by 10° in each dire
d by 10° in each direcccction.
tion.
tion.
tion.
If this requirement is not fulfilled, then it is necessary to take steps to achieve
If this requirement is not fulfilled, then it is necessary to take steps to achieve
If this requirement is not fulfilled, then it is necessary to take steps to achieve
If this requirement is not fulfilled, then it is necessary to take steps to achieve
compliance. Possible measures include strapping it to an appropriate
compliance. Possible measures include strapping it to an appropriate
compliance. Possible measures include strapping it to an appropriate
compliance. Possible measures include strapping it to an appropriate----ate base
ate base
ate base
ate base
stru
stru
stru
struccccture or fastening it using safety straps.
ture or fastening it using safety straps.
ture or fastening it using safety straps.
ture or fastening it using safety straps.
Warning