2 t9 mid/high system, 1 t9 applications, 2 t9 technical specifications – KLING & FREITAG K&F ACCESS T9 User Manual
Page 11: T9 mid/high system, T9 applications, T9 technical specifications
![background image](https://www.manualsdir.com/files/769516/content/doc011.png)
User’s Manual
ACCESS SYSTEM
KLING & FREITAG GMBH ©1995-2009
Version 6.0, 17.03.2009
Page 11 of 60
3.2
T9 Mid/High System
3.2.1
T9 Applications
The ACCESS T5 is a horn-loaded high-end sound system with a consistent and homo-
geneous dispersion pattern of 90° x 40°. It is, therefore, extremely well suited for small
to medium coverage requirements with just one system per side such as live concerts in
clubs and sound coverage in discotheques. By using pair clusters with another T9 or
large arrays with the fully compatible T5, it is possible to use the equipment at large
events and mega open-air concerts. The T9 meets all demands at the highest level ---
from techno to classic. With wideband highest sound pressure up to 139 dB and an
optimal audio quality, a minimum number of units is necessary. This allows for maxi-
mum efficiency for set-up and dismantling.
3.2.2
T9 Technical Specifications
Design
2-way horn loaded
Frequency response -10 dB
100 Hz - 19 kHz (with Controller C5/9)
Frequency response ± 3 dB
130 Hz - 17 kHz (with Controller C5/9)
Nominal coverage angle
90° x 40° (hor. x vert.)
Directivity index (DI)
12 (+1.5/-1.5) 500 Hz - 20 kHz
Nominal power handling
500 watts low-mid, 120 watts mid-high
Sensitivity 1 W/1 m
108 dB low-mid, 110 dB mid-high
Max. SPL
139 dB (SPL peak/1 m)
Components
12" chassis with conical horn
5" compression driver with CD horn / 12‘‘ diaphragm
1.5" compression driver with CD horn / 3“ diaphragm
Crossover
All-pass filter optimises phase response and delay
time between the 5’’ and 12’’ driver
Impedance
5
Ω low-mid, 10Ω mid-high
Connectors
EP-5 male / female MID: 1+ / 2-, HIGH: 3- / 4+
Enclosure
Trapezoid with 2 cluster angles 4°/15°
15 mm birch plywood with highly resistant
black structured paint
4 ergonomic butterfly handles
4 100 mm transport castors mounted on the rear,
ball proof front grille with exchangeable black
acoustic foam
Rigging
2 MAN CF4T flying points, 2 MAN HWKB strap
attachments for securing straps
Dimensions
600 x 900 x 750 mm without castors (W x H x D)
Weight incl. Castors
92 kg
Options
Transport cover with butterfly catches,
MAN/K&F flying hardware, ATM modular cradle
system, special finish in RAL colours, All Weather /
Outdoor
version