KLING & FREITAG K&F ACCESS T9 - Manual (Page 26)

User’s Manual ACCESS SYSTEM
KLING & FREITAG GMBH ©1995-2009 Version 6.0, 17.03.2009 Page 26 of 60
8.2 The ACCESS C10 Controller
8.2.1 Connectors, Controls and Displays and of the C10
1) CONFIGURATION SWITCH
When operating the ACCESS B10, this switch can be used to select the appropri-
ate filter presets. The following switch positions are available for the low-pass:
−
55 Hz: 12 dB / octave @ 47 Hz and 12 dB / octave @ 110 Hz
− 60 Hz: 12 dB / octave
− 120 Hz: 24 dB / octave
Stickers are included with the C10 Controller that document which preset is rec-
ommended for which application. The stickers can be put on where desired (i.e.
on the rack). It is important to recognize that the room and other factors can have
a crucial influence on the sound results. It is, therefore, possible that the configu-
ration recommendations may, in some individual circumstances, vary from the op-
timal settings. The sound engineer’s ear must always make the final decision.
a) Operations with the C5/9 Controller:
I
0 II
T B5
B10
T
B10
T B5
B10
60Hz 55Hz 120Hz
C5/9-C10
If flown ACCESS Sys-
tems T5/T9 and B5 are
operated via the Con-
troller C5/9 and the
B10 via the Controller
C10, the preset option
55 Hz is recommend-
able. If standing ACCESS
Systems T5/T9 and B5
are operated via the
Controller C5/9 and
the B10 via the Con-
troller C10, the preset
option 60 Hz is rec-
ommendable. If the ACCESS Systems
T5/T9 without the
bass system B5 are
operated via the Con-
troller C5/9 and the
B10 via the Controller
C10, the preset option
120 Hz is recom-
mendable.
Front
1 2 3 4
7 6 5
SENSE ( GREEN ) / LIMIT ( RED ) 120Hz
55Hz
60Hz
8
BASS BOOST
NORMAL A C C ES S C 10
0
+6
LEVEL
CLIP
dB
+1 0 d B
-4 0 d B
0 d B
INPUT SIGNAL
BA SS B
SY M . E RR O R
BA SS A
O N
POWER
A C C E S S
SYSTEM CONTROLLER