Junger Audio C8621- Dolby® D/D+/E Decoder & Metadata Generator - Manual (Page 13)

digital audio
modular
processing system
C8000
Dolby
®
E / D / D plus decoder
C8621
Page 13/19
SNMP: Metadata Error
[OFF / ON]
The metadata error is part of the module status information presented via
SNMP. To avoid unnecessary alarms you may disable this function in
case the module is temporarily not in use.
DECODER: display of general decoder parameters and setup of decoder functions:
Decoder
Depending on the actual input signal you will first see general
information of the signal format received.
Bitstream Format [Dolby E 16Bit / Dolby E 20 Bit / Dolby Digital / Dolby Digital +]
Shows the format of the decoded Dolby bit stream.
Bit Stream Data Rate [e.g. 240]
(kbps) In case of a decoded consumer format
Decoder Status [OK / Fail]