Junger Audio C8491 - Compact Card - Manual (Page 4)

digital audio
modular
processing system
C8000
3G/HD/SD-SDI – DSP 4/8/16 audio channels
C8491
page 4/21
General remark! The C8491 is a 16 channel device from the SDI de-embedding / embedding point of
view but the number of audio processing channels may be different.
Four channels are standard while 8 or 16 channels are an option. Since all parameters are the same for
each version, this document describes the 16 channel processor version. The difference will be the
number of fail over circuits (1 for the 4Ch, 2 for the 8Ch and 4 for the 16Ch option).
Another option is 5.1 surround processing. If this option is enabled one may also perform permanent
surround upmix or use the upmix for surround fail over.
web browser based GUI
Set up of all configurations, parameters and functions via a web browser.
See also C8702 Frame Controller manual and respective firmware release notes.
OVERVIEW
The modules overview of a frame (below the display of an example frame):
By simply clicking on the spanner tool symbol you will get the control pages of the C8491 and the
status window on the left side, which is also shown on mouse over.