Junger Audio C8491 - Compact Card - Manual (Page 11)

digital audio
modular
processing system
C8000
3G/HD/SD-SDI – DSP 4/8/16 audio channels
C8491
page 11/21
Input [disable / enable]
Input Gain [-20 … +20 dB]
Leveler [disable / enable] turns off Transient Processor as well.
Loudness Target Level mode [0 … -50 dBFS]
ITU mode [0 … -50 LKFS]
EBU mode [0 … -50 LUFS]
Time [10, 20, 40 sec. / 1, 2, 5, 10, 20, 40 min / 1, 2 h]
Max Gain [0 … 40 dB]
Freeze Level [-20 … -60 dB]
Transient Processor
Max Gain [0 … 40 dB]
Response [soft, mid, hard]
Limiter [disable / enable]
Max True Peak [0.0 … -20 dBTP]
Profile (Leveler, Limiter)
Processing [live, speech, pop, uni, classic]
Expander [enable / disable]
Threshold [-60 … -20 dBFS]
Range [0.0 …. 20 dB, Gate]
Release Mode [0 … 9]
Compressor [enable / disable]
Reference Level [0 … -40 dBFS]
Range [0 … 8 …. 20 dB]
Ratio [1: 1.1 … 1: 4.0]
Processing [live, speech, pop, uni, classic]
Proc Status Enable [enable / disable]
if the average gain of the module is equal or above the Leveler
Max Gain for more than 10s the respective Processing Status
soft LED turns red. This status information is condensed for all
processing channels by the module controller. The frame controller
will condense the status information for all processing modules
within a frame and may generate a SNMP trap and/or fire a GPO.
In this case the SNMP manager may poll the frame for details to
“see” which processing channel sticks.
Bit Transparent [off / on]
indicates that a channel pair is in bit transparent mode
to let non audio signals pass through without the DSP processing
to maintain data structure for non audio signals.