Junger Audio C8491 - Compact Card - Manual (Page 3)

digital audio
modular
processing system
C8000
3G/HD/SD-SDI – DSP 4/8/16 audio channels
C8491
page 3/21
location of switches:
initial set up
ADDRESS: This rotary encoder sets the CAN ID of the C8491. The 16 switch positions
are hexadecimal numbers (0x0 to 0xF). The logical CAN address also
defines the place of the module icon within the GUI overview.
SW2:
#1 OFF internal use and must be set to OFF.
#2 OFF internal use and must be set to OFF.
#3 OFF internal use and must be set to OFF.
#4 ID +16 ON
CAN address range is extended by +16 (counting from 0x10 to 0x1F)
OFF
CAN address range is standard (counting from 0x0 to 0xF) see rotary
encoder settings below.
INIT Pressing the INIT button during power up will initialize the module
parameters to factory default values.