Junger Audio C8082 - Switch Over / Ducker - Manual (Page 8)

digital audio
modular
processing system
C8000
switch over & ducking
C8082
Jünger Audio Studiotechnik GmbH
Justus-von-Liebig-Strasse 7
D -12489 Berlin
Germany phone: +49-30-677721-0
fax:
+49-30-677721-46
[email protected]
www.junger-audio.com
8/19
There are 16 presets available for audio processing. The presets will store all the PARAMETERS as
you see it on the PARAMETERS pages in the different operating modes. The Presets will be programmed
with a set of factory default parameters if you initialize the module.
The factory default settings (PRE1 …. PRE8) for 2x Stereo Ducking are :
#
Name (for both channels) Value
Main Stereo Source #1 and #2
1 Gain 0.0dB
2 Ducking Gain -6.0dB
3 Fade In Time 10msec.
4 Fade Out Time 5sec.
5 Limiter Threshold 0.0BFS
6 Limiter Program uni
7 Ducking Mode Auto
8 Bit Transparent Off
Ducking Source #1 and #2
9 Gain 0.0dB
10 Ducking Threshold -30.0dBFS.
There are another 8 presets (#17 - #24) available for Input Bus Routing.
They have the following default values :
IN 1/2
Bus S1
IN 3/4 Bus S2
IN 5/6 Bus S3
IN 7/8 Bus S4