Junger Audio C8082 - Switch Over / Ducker - Manual (Page 3)

digital audio
modular
processing system
C8000
switch over & ducking
C8082
Jünger Audio Studiotechnik GmbH
Justus-von-Liebig-Strasse 7
D -12489 Berlin
Germany phone: +49-30-677721-0
fax:
+49-30-677721-46
[email protected]
www.junger-audio.com
3/19
technical specifications
AUDIO :
resolution : 24bit
sample rate : 32...48kHz
digital processing delay : 2ms constantly
GENERAL :
backplane connector : ref. to DIN41612, 64pin, a+b, male
power supply : +5V DC
power consumption : approx. 1.000mA
dimension : 3RU, 4HP, 160mm depth
temperature : 10°C … 40°C
humidity : 90%, non condensing
hardware settings
The C8082 does not have front panel controls. It may be configured by switches and
via web browser.
On the front panel there is a status LED with different display modes:
green = status OK
yellow flashing = the module is under control of the Frame Controller
red = status is bad. It needs remote reading of the status via GUI.
It is likely that the Frame Controller has issued a SNMP trap.