Junger Audio C8082 - Switch Over / Ducker - Manual (Page 5)

digital audio
modular
processing system
C8000
switch over & ducking
C8082
Jünger Audio Studiotechnik GmbH
Justus-von-Liebig-Strasse 7
D -12489 Berlin
Germany phone: +49-30-677721-0
fax:
+49-30-677721-46
[email protected]
www.junger-audio.com
5/19
rotary encoder settings
I/O
not used
MODE
not used
CAN
0 – F
The 16 switch positions are hexadecimal numbers (0x0 to 0xF) it sets the
CAN ID. Each module within a frame must be assigned a unique CAN bus
address for proper communication with other parties of the frame, e.g. the
frame controller or the GPI/O module.
Important note! This address also sets the position of the module graphic when you control the frame via
the web GUI by a C8702 frame controller. See C8k system manual for details.
remote control operation
- Web-server based remote control of parameters via frame controller C8702
- 3
rd
party remote control by http protocol based API
(please contact Junger Audio for details)
- Hardware GPI/O control of preset operation and special module functions
- Remote control by the brc8x Broadcast Remote Controller via CAN bus