ILUMINARC LΩGIC™ 16X36 - Manual (Page 2)

LΩGIC™ 16X36 QRG
2
About this
Guide
The
LΩGIC ™ 16X36 Quick Reference Guide (QRG) only contains the
product’s connection and mounting information, as well as the menu
options and the DMX values.
Disclaimer
This QRG does not replace the product’s User Manual. You must
download the corresponding User Manual from the ILUMINARC®
Web site (www.iluminarc.com) to learn about the disclaimers, safety
notes, programming modes, and technical information.
Safety Notes ·
DO NOT open this product unless instructed. It contains no user
serviceable parts.
·
DO NOT look at the light source when the
LΩGIC™ products are
on.
·
DO NOT touch the
LΩGIC™ controller or products while
operating because they may be hot.
·
DO NOT cover the ventilation slots when this product is operating
to avoid internal overheating.
·
DO NOT leave any flammable material within 50 cm from the
LΩGIC™ controller or products while connected to the power
outlet to minimize the risk of fire.
·
DO NOT mount this product overhead without using a safety
cable.
·
DO NOT operate this product or any
LΩGIC™ product in any
location where dust, excessive heat, water, or humidity may affect
them.
·
DO NOT operate this product or any
LΩGIC™ product if you see
damage on the housing, lenses, or cables. In such case, have the
damaged parts replaced by an authorized technician at once.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
What Is
Included
· One LΩGIC™ 16X36
· One RJ-45 to 3-pin DMX male adapter (input)
· One RJ-45 to 3-pin DMX female adapter (output)
· Sixteen (16) RJ-45 couplers
· One Warranty Card
· One Quick Reference Guide