Doremi GHX-10 - Manual (Page 22)

5 Doremi Universal Interface Software (duis)
5.1 Doremi Universal Interface Software Installation
To install the Doremi Universal Interface software, follow the steps below:
1. Plug the provided USB cable between the GHX-10 and an available USB port on your PC -
see Figure 2 for USB connector location
2. Power on the GHX-10 by pressing the PWD button
3. If you get the "Found New Hardware Wizard" window at this stage, click “Cancel”
4. Run the installation package by double-clicking on a file like
“Doremi_Universal_Interface_Software-4.0.2.0.exe” which can be downloaded from our web
site:
http://www.doremilabs.com/ .
5. After the installation is over, if you get the "Found New Hardware Wizard", go through all the
steps shown below:
• Step 1 : Select the “No, not this time” option and click on “Next >”
Figure 5: ”Found New Hardware Wizard” Window – Step 1
• Step 2 : When asked for software installation, choose the option “Install the software
automatically (recommended)”
Figure 6: ”Found New Hardware Wizard” Window – Step 2
GHX.OM.000510.DRM Page 22 Version 2.2
Doremi Labs