Doremi GHX-10 - Manual (Page 11)

3.3 Output Menu
This menu can be used to setup the output parameters.
Sub-Menu Value Description
Interface HDMI/DVI
SDI Set the active output. For common
video formats, both outputs can be
active simultaneously
SDI color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext
XYZ’ Set the SDI output color mode
Auto: 601 (SD) 709 (HD), RGB
(2K)
“ext” designates extended color
range (full bandwidth) as opposed
to limiting the color spectrum to
comply with ITU standards.
SDI Resolution NTSC
PAL
720p
1080i/sf
1080p
2Kp
2Kp Flat
Match Input Set the SDI output pixel resolution.
Match Input: In this mode, the SDI
output will have the same
resolution as the input source.
SDI Frequency 23.98
24
25
29.97
30
47.95 (1080p only)
48 (1080p only)
50 (720p & 1080p only)
59.94 (720p & 1080p
only)
60 (720p & 1080p only)
Match input Set the SDI output frame rate
Match Input: In this mode, the SDI
output frame rate will be equivalent
to the input source
SDI Force Interl Off
On Force the SDI output to interlaced
(or Segmented Frame)
GHX.OM.000510.DRM Page 11 Version 2.2
Doremi Labs