Doremi GHX-10 - Manual (Page 18)

3.8 System Menu
This menu allows to access the system parameters.
Sub-Menu Description
Save Save current settings to flash.
Select to Save, when you get the “?”
Select again to confirm, you should see
“#”
Firmware: v.x.y Firmware version
Serial: zzzzzzz Serial number
License: uuuuuuuu License number
Temp: vv C Temperature (in degree Celsius)
Standby Standby mode. Put the unit in Power
Down mode
Auto Standby
Off, 60minutes,
120minutes
Auto Standby mode. Set the idle time
duration before the unit goes in power
down mode automatically
IR
0 to F default is 0
Infra-Red. To avoid IR interference when
you have multiple GHX units, you can
assign each a different IR code from 0x0
to 0xF (16 total). You need to set the DIP
switch on your Doremi IR remote
accordingly.
MicroSD or SD Memory
update Depending on your unit, you might see
“Micro SD” or “SD Memory” firmware
update
3.9 Status Menu
This menu can be used to view the Input and Output status.
Sub-Menu Description
In:
Out: Input and Output format status
information
GHX.OM.000510.DRM Page 18 Version 2.2
Doremi Labs