Doremi GHX-10 - Manual (Page 12)

Sub-Menu Value Description
Ancillary out Off
Bypass SDI
Off: No VANC on SDI output
Bypass SDI: Pass Ancillary data
from SDI input to SDI output
HDMI/DVI color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext Set the HDMI/DVI output colors
Auto: RGB unless otherwise
communicated over EDID.
“ext” designates extended color
range (full bandwidth) as opposed
to limiting the color spectrum to
comply with ITU standards.
DVI Resolution Auto
VGA
SVGA
XGA
WXGA
SXGA
SXGA+
WSXGA+
WUXGA
480p
480i
576p
576i
720p
1080i
1080p
Match input Set the DVI output pixel resolution.
Auto: In this mode, the unit will
read the default resolution of the
connected monitor using EDID and
sets the output to match
Match Input: In this mode, the unit
will set the DVI output resolution to
match the input resolution – or to
the closest output resolution if the
exact input resolution is not
available.
VGA= 640x480
SVGA= 800x600
XGA= 1024x768
WXGA= 1280x800
SXGA= 1280x1024
SXGA+= 1400x1050
WSXGA+= 1680x1050
WUXGA= 1920x1200
GHX.OM.000510.DRM Page 12 Version 2.2
Doremi Labs