Doremi GHX-10 - Manual (Page 10)

3.2 Input Menu
This menu can be used to setup the input parameters.
Sub-Menu Value Description
Interface SDI
HDMI/DVI
Pattern Input interface setting.
Pattern produces a color pattern
with 16 channels of audio at
different frequencies
SDI Color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext
XYZ’
YCxCz' SDI input color setting.
Auto: Single Link (1.5Gbps) inputs
will be treated as 601 (SD) or 709
(HD). Dual link (1.5Gbps) inputs
will be treated as RGB.
Ext: designates extended color
range (full bandwidth) as opposed
to limiting the color spectrum to
comply with ITU standards.
HDMI/DVI color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext HDMI/DVI input color setting
Auto: Detected using meta-data, if
not present the default is RGB
Ext: designates extended color
range (full bandwidth) as opposed
to limiting the color spectrum to
comply with ITU standards.
Default EDID 720p 50
720p 60
1080i 25
1080i 30
1080p 50
1080p 60
WUXGA 50
WUXGA 60
DVI input default setting.
When you feed a signal to the
HDMI input, the GHX-10 has to
report a native resolution over
EDID. This menu allows the user
to change the default resolution of
the GHX-10 between the
available formats.
CAUTION: You must disconnect
HDMI/DVI source before
changing this setting.
GHX.OM.000510.DRM Page 10 Version 2.2
Doremi Labs