Doremi IMS1000 - Manual (Page 83)

IMS.OM.002949.DRM Page 83 of 320 Version 1.7
Doremi Labs
7 Shut Down
In order to properly shutdown the IMS1000 board and the projector, the user must follow the
steps below.
 To shut down the board, go to Administration → System (Figure 94).
Figure 94: Shut Down

Click on the Shutdown button and wait two minutes. The LED lights on the IMS1000 will
stop flashing and the HDD lights will have a steady light once it has finished shutting
down.

After two minutes, refer to the projector manufacturer manual for proper power down
sequence to shut down the projector.

The IMS1000 board and the projector have now been properly shut down.
Warning: The IMS1000 must be shut down according to the designated method. Failure to
follow the above method may result in file corruption.
Shutdown
Button