Doremi IMS1000 - Manual (Page 74)

IMS.OM.002949.DRM Page 74 of 320 Version 1.7
Doremi Labs
● Go to Menu → Administrator Setup → Content Devices Configuration (Figure 79). From
the drop-down menu, make sure that Doremi is selected (Figure 80).
Figure 79: Content Devices Configuration
Figure 80: Drop-Down Menu
● Turn the projector on by pressing the green Power button on the touch panel controller
(Figure 81). After about two minutes, the projector will be fully powered on.
Content
Devices
Configuration
Administrator
Setup
Doremi
Selected