Doremi IMS1000 - Manual (Page 66)

IMS.OM.002949.DRM Page 66 of 320 Version 1.7
Doremi Labs
6 Installation and Marriage with a Christie Series-2
Projector

Before you begin to install the IMS1000 into your projector, be sure that:
o The projector is powered down and in the off position.
o Disconnect the AC power cord from the wall.
o Remember to always follow ESD procedures.
6.1 Preparation
Figure 64: Christie Projector

Remove the blank cover of the media block slot, if it is present, by unlatching the two
latches on the sides (Figure 65).
Figure 65: Faceplate Latches

The media block slot should now be empty (Figure 66).
Two
Latches