Doremi Rapid and Rapid-2x - Manual (Page 84)

14.2 Connecting to a Samba Network
• To mount a Samba share directory type the following commands:
• Type: su and then press "Enter".
• Password: The password will be the one that corresponds to the “root” username
and login.
• Type: mount -
tcifs//“ipaddress”/data/mntsamba-o
username=login and then press "Enter".
• Where the IP address can be replaced by the hostname of the computer.
• “/data” is the name of the directory shared on this unit.
• “login” is a username used to connect to the Samba share.
Note: Another way to access a Samba network is to go to the RedHat menu “Network Servers”
and follow the network and computer found.
RAP.OM.000960.DRM Page 84 Version 1.4
Doremi Cinema LLC