Doremi DCP to ShowVault Conversion Procedure User Manual
Page 21

Figure 49: 2G RAM Modules
•
Gently insert the 2GB modules into the RAM slots. Apply pressure evenly until the
modules snap into place.
•
Place the old modules into the packaging for the new modules. Ship these back to
Doremi, along with the Media Block and the AES card.
•
Place the unit's lid back on the unit and tighten into place using all of the screws you
saved at the beginning of the procedure.
Figure 50: Screw Locations
SHV.DP.001968.DRM
Page 21
Version 1.2
Doremi Cinema LLC Confidential
Screw
Locations
Screw
Locations
Sticker
This manual is related to the following products: