Doremi DCP to ShowVault Conversion Procedure - Manual (Page 17)

Figure 37: AES Card Being Removed
• Unscrew the two nuts holding the card in place using the nut driver and remove the card
so that the bracket looks like Figure 38. Place the card in the anti-static bag provided.
Figure 38: AES Card Removed
• Take the AES bracket and lay it face down and place the slot cover (Figure 39) over it.
Flip it over while holding the cover in place. Tighten the bracket with the two M3 screws
provided from the front so that it looks like Figure 40.
Figure 39: Slot Cover
Figure 40: AES Bracket with Slot Cover
• Reinsert the bracket into the same position that it was in previously and tighten in place
(Figure 41).
SHV.DP.001968.DRM Page 17 Version 1.2
Doremi Cinema LLC Confidential
IDC
Cable
Screw
Removed
AES Card
Bracket