DekTec DTE-3114 IP to 4x QAM - Manual (Page 9)

DTE-3114 – Networked Quad QAM Modulator
USER MANUAL
9
2.2 LCD display
The LCD display contains the following information:
1. Device identifier Programmable from the web and SNMP interface.
2. Active channels Number of channels that have been enabled. If no channels
are active, “Idle” is displayed.
3. Mode QAM mode and modulation standard.
4. RF level Total output power level in dBm.
5. Frequency Carrier frequency of each channel in MHz.
6. Network address MAC address and IP address (alternating).
When a hardware failure is detected the display will blink continuously and the DTE-3114 has to be
returned to the manufacturer.