DekTec DTE-3114 IP to 4x QAM - Manual (Page 39)

DTE-3114 – Networked Quad QAM Modulator
USER MANUAL
39
specific-multicast join. If the addressing method is
unicast or any-source-multicast this field is ignored."
::= { nwRxEntry 8 }
nwRxFecEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable FEC reconstruction.
0 disable FEC reconstruction
1 enable FEC reconstruction"
::= { nwRxEntry 9 }
nwRxIpToOutputDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired delay in ms between the reception of an IP
packet and the data leaving the channel.
The delay is the sum of the FEC delay and IP jitter tolerance,
see 'nwRxFecDelay' & 'nwRxIpJitterTolerance'."
::= { nwRxEntry 10 }
nwRxOperationalStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
disabled(1),
processingError(2),
settingsError(3),
noInput(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operational status of the channel.
0 channel is enabled and there are no problems
1 channel has been disabled
2 there is a problem with the processing of the
received IP stream
3 there are problems with the settings
4 no input"
::= { nwRxEntry 11 }
nwRxProtocol OBJECT-TYPE
SYNTAX INTEGER {
udp(0),
rtp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP protocol used by the incoming IP stream.
0 receiving a UDP stream
1 receiving an RTP stream"
::= { nwRxEntry 12 }
nwRxNumberOfTpPerIp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transport packets per IP packet. A value of 0
means that this MIB object is irrelevant, e.g. for SDI-over-IP"
::= { nwRxEntry 13 }
nwRxFecNumberOfRows OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of FEC rows."
::= { nwRxEntry 14 }
nwRxFecNumberOfColumns OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of FEC columns."