DekTec DTE-3114 IP to 4x QAM - Manual (Page 40)

DTE-3114 – Networked Quad QAM Modulator
USER MANUAL
40
::= { nwRxEntry 15 }
nwRxIpLostBeforeFec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets lost before FEC reconstruction."
::= { nwRxEntry 16 }
nwRxIpLostAfterFec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets lost after FEC reconstruction."
::= { nwRxEntry 17 }
nwRxIpJitterTolerance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in ms that the channel waits to receive
'late' IP packets. Because of this delay the channel
can tolerate IP jitter up to the indicated value."
::= { nwRxEntry 18 }
nwRxFecDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in ms required to receive a sufficient number of packets
to enable correction of an IP packet in a 2D FEC block."
::= { nwRxEntry 19 }
nwRxTsPacketSize OBJECT-TYPE
SYNTAX INTEGER {
bytes188(0),
bytes204(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of the MPEG-2 packets in the received transport stream.
0 188 bytes
1 204 bytes"
::= { nwRxEntry 20 }
nwRxTsRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated bitrate of the transport stream reconstructed for this channel
at 188-byte per transport packet."
::= { nwRxEntry 21 }
nwRxTsPcrPresent OBJECT-TYPE
SYNTAX INTEGER {
noPcrs(0),
reliablePcrs(1),
unreliablePcrs(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PCRs in the incoming transport stream are present or absent.
0 no pcrs present
1 reliable pcrs present
2 unreliable pcrs present"
::= { nwRxEntry 22 }
nwRxTsRateChangeCounter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter that keeps the number of bitrate changes detected on this channel.
During normal operation this counter should remain constant."
::= { nwRxEntry 23 }
nwRxTsRateEstimationMode OBJECT-TYPE