DekTec DTE-3114 IP to 4x QAM - Manual (Page 35)

DTE-3114 – Networked Quad QAM Modulator
USER MANUAL
35
0 disable temperature-alarm trap generation
1 enable temperature-alarm trap generation"
::= { temperature 2 }
tmpAlarmValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold temperature in tenths of degrees Celsius. If
the internal device temperature exceeds this threshold,
trap 'trTemperatureError' is generated (if enabled)."
::= { temperature 3 }
---------------------------------------------------------------------------
-- Group: system - device --
---------------------------------------------------------------------------
devType OBJECT-TYPE
SYNTAX DisplayString(SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device type number (e.g. 'DTE-3100')."
::= { device 1 }
devSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(13))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique serial number for this device."
::= { device 2 }
devHardwareRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware revision number."
::= { device 3 }
devFirmwareVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware version number."
::= { device 4 }
devPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
external(0),
ethernet(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which power source is used by the device:
0 device is powered from an external power-supply
1 device is powered via network connector (Power over Ethernet)"
::= { device 5 }
devDisplayName OBJECT-TYPE
SYNTAX DisplayString(SIZE(5))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Display name assigned to this device. Devices with a
LCD display will show this string on their display."
::= { device 6 }
devNetworkLinkSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mbps100Mbps(0),
speed1000Mbps(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Speed of the network link.
0 10/100 Mbps
1 1000 Mbps
"