DekTec DTC-720 Xpect - Manual (Page 21)

DTC-720 Xpect ® – 24/7 Transport Stream Monitoring
USER MANUAL
21
5. Web GUI
This chapter provides a quick introduction to Xpect’s web GUI. The web GUI allows you to monitor
the live status of each of the transport streams, browse through the event log with all the error
messages, access stream captures and perform some basic control tasks.
To connect to the web GUI open an internet browser (e.g. IE9, Google Chrome) and browse to the
URL address for the Xpect web server:
http://:, where
= IP address or name of the PC on which Xpect is running
= SOAP/web server IP port (from general configuration file)
For example: http://10.10.1.21:5089 , http://myxpectpc:5089 or http://localhost:5089
NOTE:
Due to the resources required it is not advisable to run the Web GUI on the Xpect Server.
5.1 Main GUI elements
The screenshot below shows the main GUI elements of the web interface.
A: List of all transport streams monitored by Xpect. Select one to set the focus on it.
B: A TAB interface with several pages displaying status information about the currently selected
transport stream.
C: The name of the transport stream that has the focus. The LED indicator is red if there are any
errors detected for this transport stream, or green if there are none.