DekTec DTC-720 Xpect User Manual
Page 18
DTC-720 Xpect
®
– 24/7 Transport Stream Monitoring
USER MANUAL
18
to a Cell Template.
D. Enable the Mosaic and press ‘Commit changes’ to upload and activate the configured Mosaic.
Depending on the size of the mosaic, the mosaic will appear in a few seconds. Check the bottom
left status bar for reported errors (
in red
).
The most common error is “
No Upload possible: Mosaic contains unassigned cells
”. This is
reported when no service is assigned to one or more Template Cell(s) in the grid.
It’s possible to adjust the XML based Cell Templates, for example to change text font-size and
colour. The files are located in ‘
C:\Users\Public\Documents\DekTec\Xpect\ConfigTool
’. The file names start
with the size (Full/Large/Medium/Small) and each size have 3 to 5 types like the types shown in the
configuration tool (For example L+R, L+R + IP source, 5.1, etc.)
Besides the manual Template changes it is also possible to add extra dynamic field information for
the “Override Service Name” field located in a Service Cell (like shown in the picture above). By
default a service cell uses dynamic fields SvcName + SvcBitrate. Changing the “Override Service
Name” field overrides these default dynamic fields.
{TsId}
Prints the TS ID, in decimal.
{NetworkName}
Prints the Network Name from the NIT
{TsBitrate:< refresh rate in Secs>} :