DekTec DTC-720 Xpect User Manual
Page 14
DTC-720 Xpect
®
– 24/7 Transport Stream Monitoring
USER MANUAL
14
5 Test the installation
Open an internet browser (recommended: IE9 or
Google Chrome);
Go to http://localhost:5089
4
- It is possible that the browser will prompt you to install
the Silverlight 4 runtime; if so, please follow the
installation instructions shown in the browser.
The Xpect web GUI should now be loaded (note all
Xpect instances will automatically start when the PC
booted) – if the GUI does not load please refer to: §6.2
The Xpect Web GUI will indicate the Transport Stream
overall status: ‘LEDs’ (in the left hand pane) will either
be Red (indicating TR 101 290 or Template or Extra Test
errors have been detected) or Green (if no errors are
currently being detected). If the ‘LEDs’ are grey then
either there are no syncs present or Xpect is not yet
monitoring;
Greyed out ‘LEDs’ in the right hand pane mean that the
condition is not currently being monitored.
You should now be able to browse through the status of
the transport streams you have configured.
The basic setup process is now completed.
After successfully completing the steps above, you will have Xpect running in its most basic setup. You
may now wish to further set up Xpect by creating templates and custom TR 101 290 configurations.
More details about the configuration can be found in §4. Detailed Configuration. For more details
about the Web GUI please refer to §5. Web GUI.
IMPORTANT NOTE: For using the Video Streaming function on Windows Server 2008 make sure that the Windows
Feature ‘Desktop Experience’ is enabled: Administrative Tools - Server Manager - select Features - Add Feature
Desktop Experience (including Ink and Handwriting Services)
4
NOTE: if you changed the default SOAP/Web port replace 5089 with the port you specified