Dtc-315 – DekTec DTC-315 DtEncode User Manual

Page 27

DTC-315

Page 27/29

Manual for DTC-315 DtEncode Software

Essential Tools for Digital-TV Professionals

April 2014

Appendix G: DtEncode specific output controls for IP

When using adapters that supports IP output, a detailed configuration window permits to fine tune
the IP output.

DTA-160’s IP output settings window

Item1

Item2

Explanation

IP Parameters

This area is to set IP output

Address

This is output stream destination IP address.

port

This is output stream IP port.

Protocol

You can select UDP or RTP.

TS/IP

You can select the number of TS packet per IP MTU (from 1to 7).

FEC

You can fine-tune the FEC parameter.

( No FEC or D = from 4 to 16, L = from 1 to 20)