Dtc-315 – DekTec DTC-315 DtEncode User Manual

Page 18

DTC-315

Page 18/29

Manual for DTC-315 DtEncode Software

Essential Tools for Digital-TV Professionals

April 2014

5.9

5.9....4

4 Output Parameter

Output Parameter

This screen permits the output TS and the output adapter detailed configuration.

Details are as below

Item1

Item2

Explanation

TS Output

This area is to set physical output

Adapter

This software detect automatically hardware(RF output board…).

Format :

[ OUTPUT I/F TYPE ( Product Name, PORT NUMBER ) ]

For example :

QAM-Output(DTA-110)

Details

This is detail parameter for output I/F.

Adapter Information

Please push (i) button if you want. You can display selected adapter information.

TS Rate

This is TS Rate [bps]. You can edit this directly.

Packet Size

This is TS Packet size. You can select 188byte, 204byte

188byte : Normal TS

204byte : TS + dummy(NULL) 16 byte

Multiplex
Format

TS ID

This sets the TS ID(16bit). From 0 to 65535

Network ID

This sets the Network ID(16bit). From 0 to 65535

( you can not set.)

Network

This is Network type. You can select: -, ATSC, DTMB, DVB-C, DVB-T, DVB-S, ISDBT-
ONESEG, ISDBT-FULLSEG, QAM-B, QAM-C, etc..

Add Dummy SI

To add Dummy SI (necessary for reception by STB), check this “check box”.