DekTec DTC-315 DtEncode - Manual (Page 20)

DTC-315
© 2009-2014 DekTec Digital Video BV Page 20/29 Manual for DTC-315 DtEncode Software
Essential Tools for Digital-TV Professionals April 2014
Appendix A: DtEncode specific output controls for DVB-T
(*)
When using adapters that supports DVB-T modulation, a detailed configuration window permits to
fine tune the RF output.
DTA-115’s DVB-T RF output settings window
Item1 Item2 Explanation
RF Output For RF parameters
Frequency This is output frequency [MHz] of the RF modulator.
You can enter directly the value or use the spin button.
(Check your hardware specification for available range of values)
Level This is output level [dBm] of the RF modulator (**).
You can enter directly the value or use the spin button.
The value should be between -27dBm and +3dBM
Modulation For the Modulation parameters
Modulation You can select 16QAM, 64QAM or QPSK.
Mode You can select 2K, 4K or 8K
Code Rate You can select 1/2, 2/3, 4/5, 5/6, 7/8.
Bandwidth You can select 5Mhz, 6Mhz, 7Mhz, 8Mhz.
Guard Interval You can select 1/4, 1/8, 1/16 or 1/32.
(*) This is available if your output adapter supports this RF output.
(*) This is only available for DTA-115, DTA-112 and DTA-2115 output adapters