DekTec DTC-315 DtEncode - Manual (Page 25)

DTC-315
© 2009-2014 DekTec Digital Video BV Page 25/29 Manual for DTC-315 DtEncode Software
Essential Tools for Digital-TV Professionals April 2014
LayerA This area is to set LayerA part.
Segments You can set from 0 to 13 segments.
Please attend LayerA + LayerB=13 segments always.
Moduration You can select DQPSK, QPSK, 16QAM or 64QAM.
Code Rate You can select from 1/2, 2/3, 3/4, 5/6, 7/8
Time Interlace You can select I=1, I=2, I=4
Layer A as default layer You can check this if Layer A is the default layer.
LayerB This area is to set LayerB part.
Segments You can set from 0 to 13 segment.
Please attend LayerA + LayerB=13 segments always.
Moduration You can select DQPSK, QPSK, 16QAM, 64QAM .
Code Rate You can select from 1/2, 2/3, 3/4, 5/6, 7/8
Time Interlace You can select I=1, I=2, I=4
Layer B as default layer You can check this if LayerB is the default layer.
(*) This is available if your output adapter supports this RF output and is licensed for ISDB-T.
(**) This is only available for DTA-115, DTA-112 and DTA-2115 output adapters