DekTec DTC-315 DtEncode - Manual (Page 21)

DTC-315
© 2009-2014 DekTec Digital Video BV Page 21/29 Manual for DTC-315 DtEncode Software
Essential Tools for Digital-TV Professionals April 2014
Appendix B: DtEncode specific output controls for QAM
(*)
When using adapters that supports QAM modulation, a detailed configuration window permit to fine
tune the RF output.
DTA-112’s QAM RF output settings window
Item1 Item2 Explanation
RF Output For RF parameters
Frequency This is output frequency [MHz] of the RF modulator.
You can enter directly the value or use the spin button.
(Check your hardware specification for available range of values)
Level This is output level [dBm] of the RF modulator (**).
You can enter directly the value or use the spin button.
The value should be between -27dBm and +3dBM
Modulation For the Modulation parameters
Modulation You can select 64QAM or 256 QAM.
Annex You can select between Annex A, B, or C..
(*) This is available if your output adapter supports this RF output.
(**) This is only available for DTA-115, DTA-112 and DTA-2115 output adapters