Dtc-315 – DekTec DTC-315 DtEncode User Manual

Page 24

DTC-315

Page 24/29

Manual for DTC-315 DtEncode Software

Essential Tools for Digital-TV Professionals

April 2014

Appendix E: DtEncode specific output controls for ISDB-T

(*)

When using adapters that supports ISDB-T modulation, a detailed configuration window permits to
fine tune the RF output.

DTA-115’s ISDB-T RF output settings window

Item1

Item2

Explanation

RF Output

For RF parameters

Frequency

This is output frequency [MHz] of the RF modulator.

You can enter directly the value or use the spin button.

(Check your hardware specification for available range of values)

Level

This is output level [dBm] of the RF modulator (**).

You can enter directly the value or use the spin button.

The value should be between -27dBm and +3dBM

Modulation

For the Modulation parameters

Broadcast

You can select Digital Television, 1seg Radio, or 3seg Radio

Mode

You can select between 1, 2 and 3.

Partial Reception

You can check this if you use 1seg service.

Guard Interval

You can select 1/4, 1/8, 1/16, 1/32