Dtc-315 – DekTec DTC-315 DtEncode User Manual

Page 26

DTC-315

Page 26/29

Manual for DTC-315 DtEncode Software

Essential Tools for Digital-TV Professionals

April 2014

Appendix F: DtEncode specific output controls for DTMB

(*)

When using adapters that supports DTMB modulation, a detailed configuration window permits to
fine tune the RF output.

DTA-110’s DTMB RF output settings window

Item1

Item2

Explanation

RF Output

For RF parameters

Frequency

This is output frequency [MHz] of the RF modulator.

You can enter directly the value or use the spin button.

(Check your hardware specification for available range of values)

Level

This is output level [dBm] of the RF modulator (**)..

You can enter directly the value or use the spin button.

The value should be between -27dBm and +3dBM

Modulation

For the Modulation parameters

Modulation

You can select 4NRQAM, 4QAM, 16QAM, 32QAM or 64QAM

Frame Header

You can select 420, 595 or 945

Interleave

You can select IL1 or IL2

Bandwidth

You can select 5Mhz, 6Mhz, 7Mhz or 8Mhz.

Code Rate

You can select 0_4, 0_6 or 0_8

Frame Numbering

Check to enable to Frame Numbering

(*) This is available if your output adapter supports this RF output and is licensed for DTMB

(**) This is only available for DTA-115, DTA-112 and DTA-2115 output adapters