Dataman 848 - Manual (Page 38)

DATAMAN 848 MANUAL
38 Operation
Options
Modify Algorithm Parameters
Menu Options | Parameters modify
Hot-key F3
This function allows a user to modify the programming
parameters of the chips being programmed. With the
programming parameters for the
Figure 4-7 Example screen: Modify algorithm parameters
selected chip appearing on screen, the user activates the
"modify algorithm screen" and changes the parameters by
moving the cursor to the corresponding field and changing
the value to the desired value. If a value entered exceeds
the allowable limits for a given parameter, a warning will be
flashed, together with allowable limits, after the user
attempts to confirm the setting by pressing "OK".
Warning: Only experienced users should use this
option, as it can damage the device if it is used incorrectly.
If you want to program a device that is not supported by
the DATAMAN-848, do the following:
1. Select a device that uses the same programming
algorithm as the device in question.